Fix network on Windows - Revision history

Favyen Bastani at 19:42, 15 July 2014

2014-07-15T19:42:48Z

Favyen Bastani at 19:42, 15 July 2014

2014-07-15T19:42:06Z

Favyen Bastani at 19:41, 15 July 2014

2014-07-15T19:41:56Z

Favyen Bastani: Created page with "If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packe..."

2014-07-14T16:59:49Z

Created page with "If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packe..."

New page

If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packets dropping when large amounts of data are being transferred. This is because Windows ignores the MTU setting from DCHP server. To resolve this, you need to set the MTU on each network interface to 1450 instead of the default 1500.

To do this, you can follow the guide at http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-windows-7-or-windows-8/

@@ Line 1: / Line 1: @@
-== Edit: this is not required anymore, MTU should be set to 1500. ==
+<span style="color: red;"><b>Edit: this is not required anymore, MTU should be set to 1500.</b></span>
 If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packets dropping when large amounts of data are being transferred. This is because Windows ignores the MTU setting from DCHP server. To resolve this, you need to set the MTU on each network interface to 1450 instead of the default 1500.
 To do this, you can follow the guide at http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-windows-7-or-windows-8/

@@ Line 1: / Line 1: @@
-Edit: this is not required anymore, MTU should be set to 1500.
+== Edit: this is not required anymore, MTU should be set to 1500. ==
 If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packets dropping when large amounts of data are being transferred. This is because Windows ignores the MTU setting from DCHP server. To resolve this, you need to set the MTU on each network interface to 1450 instead of the default 1500.
 To do this, you can follow the guide at http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-windows-7-or-windows-8/

← Older revision		Revision as of 19:41, 15 July 2014
Line 1:		Line 1:
		+	Edit: this is not required anymore, MTU should be set to 1500.
		+
	If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packets dropping when large amounts of data are being transferred. This is because Windows ignores the MTU setting from DCHP server. To resolve this, you need to set the MTU on each network interface to 1450 instead of the default 1500.		If you are installing a Windows operating system on Luna Node Dynamic (note that you will require your own license), then you may notice strange network performance with packets dropping when large amounts of data are being transferred. This is because Windows ignores the MTU setting from DCHP server. To resolve this, you need to set the MTU on each network interface to 1450 instead of the default 1500.

	To do this, you can follow the guide at http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-windows-7-or-windows-8/		To do this, you can follow the guide at http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-windows-7-or-windows-8/